Mirror Mounting Tape

Select from the mirror mounting tape products below for more information.

To place an order call:
888-655-3430

1/8" Mirror Mounting Tape

Closed cell, 1/8” polyethylene foam, coated both sides with a permanent, rubber-based adhesive. The adhesives are protected by a durable, polycoated densified kraft liner. This liner is specifically designed to provide tear resistance and easy removability.

Physical Properties:

180° Peel Adhesion (30 minutes dwell on stainless steel)		120 oz./in. of width
Loop Tack		9 lbs.
Polyken Tack (100 g/cm, 1 second dwell, 0/1 cm/sec separation rate)		800 grams
Shear Resistance (90°F, 2lbs. load)		1 square inch – 300+ hours ¼ square inch – 1 hour
Application Range		40° F to 150°F
Service Temperature Range		0°F to 150°F

These are approximate values and do not constitute warranty that products are fit for a particular purpose. The customer is advised to fully determine the suitability of these products for his intended use. These products conform to published specifications, if any, and the products are merchantable. Test data contained herein is believed to be reliable but unless specifically stated are not to be taken as specifications for products.

White
Product Number	Description	Packaging	Price
18X12W	1/8" x 1/2" x 18yds, White	12 rolls per case	$3.85 per roll
18X34W	1/8" x 3/4" x 18yds, White	8 rolls per case	$5.32 per roll
18X1W	1/8" x 1" x 18yds, White	6 rolls per case	$5.97 per roll

Black is available on request. Free freight is included for orders of two or more cases.